12 Volt Wall Charger 1Amp 3 Stage SLA Battery Charger
The Adventure Power 1A Charger/Maintainer charges and maintains Sealed Lead Acid batteries in boats, motorcycles, ATVs, snowmobiles, watercraft and other vehicles. This charger is small, lightweight and safely maintains battery charge while in storage with out having to disconnect from the vehicle.
image
Over time a vehicle battery will lose charge if not in use. A battery maintainer or charger typically keeps your car, motorcycle, scooter or other vehicle battery maintained and healthy. This is especially helpful when the battery will not be used for a long period of time.
Modern "smart" charger and maintainers automatically switch themselves from charger to maintainer when the battery reaches its full charge. The maintainer will send a small electrical current (trickle charge) to keep the battery at 100% charge. This will maintain the battery until the next use.
Three Stage Charge Cycle
An integrated circuit monitors and controls both the output voltage and current of the charger through three separate charge states:
A high current, fast charge state: battery charges at 2,000 mA fast charger current rate until the battery voltage reaches 14.6 volts.
A topping charge state: battery charges at 14.6 volt constant voltage and current begins to taper until current is less than 500 mA.
A precision float charge state: the charger changes to the float state and holds the battery voltage at 13.6 volts continuous. This allows the charger to remain connected to the batteries during periods of non-use, keeping the batteries in the state of full charge.
Return to Bulk charge: should the battery voltage drop to 13 volts, the charger will return to the bulk charge stage.
Short-circuit protection – protects the charger from short-circuit damage
Over Current protection – protects the charger from over-current demand
Over Voltage protection – protects the batteries from damage
Battery Polarity Reversal – protects the charger and batteries against incorrectly installed batteries
Low Battery Voltage – when the battery is 8V, the charger will not operate and the battery needs to be replaced
Weight 2 lbs
SKU 001-0033
Weight 1.5 Pounds
Product Dimensions 9.9 x 6.9 x 3.5 inches
Voltage 12V
BuckEye Cam 30 Day Return Policy
(The term “customer” used in this document refers to the end user as well as dealers and distributors. The term “system” includes all cameras, bases and accessories)
The BuckEye Cam system is shipped to the customer once payment has cleared. (in the case of dealers or distributors, once payment terms are set)
The customer has 30 days to return the system whole and intact to ATSI from the time of shipment.
After ATSI has received the system and its condition evaluated, the customer will be refunded the purchase price under the following conditions:
If the system is returned in an acceptable condition, the customer will receive a refund less a 10% re-stocking fee.
If the system is missing parts, refunds will not be issued for those parts.
Damaged items will be refunded at a reduced rate of 25%.
Severely damaged items may be sent back to the customer and a refund refused.
There are NO refunds on shipping and the return shipping is the customer's responsibility.
If ATSI deems the system to be in a condition less than acceptable, ATSI will adjust the refund accordingly and notify the customer of those changes.
Some items may be non-refundable such as high gain antennae, high gain antenna cables and the parabolic grid antennae. Check with ATSI for further details.
Items purchased through dealers/distributors must be returned to the respective dealer/distributor.
These terms are subject to change. Any changes will be communicated in a timely manner.
